Fixed: Super MB Pro M6/SD C4 Benz Software Login Failure

Problem: I have a customer with a Super MB Pro M6 (purchased from the inside, as usual). And today, April 1st, the XENTRY program won't open! I enter the username and password as usual, but the program won't open! 

Can you help us?

Solution

A file in MB Pro M6 or SD C4 has expired, and the Mercedes-Benz software cannot be logged in. 

Simply replace the "offline.properties" file in the following two paths to resolve the problem:

C:\ProgramData\Mercedes-Benz\config\XD_DT    

C:\ProgramData\Mercedes-Benz\config\XD_MB

(Note: Both paths should be replaced.)

Replaced file free download:

https://mega.nz/file/0pUlHYoR#w0g2PQNbCg-NjuLB_7404StTG2NBEm0Gu0QOJFml1tE

Techical Support

Email: Sales@OBD2shop.co.uk

WhatsApp: +86 13983755934

Telephone: +86 13983755934

WeChat: +86 13983755934

Skype: OBD2tool.co.uk

www.obd2shop.co.uk

Solved: Super MB Pro M6 + SSD (749/701) Network Problem

Problem: Super MB Pro M6 + V2022.12 WIN10 SSD has met network problem, it gave the error as below:

"Initialisierung des Diagnose-Multiplexers ist fehlgeschlagen.

Mogliche Ursachen:

Die Verbindung zwischen dem Diagnose-Multiplexer und der Diagnosedose ist unterbrochen.

Die Verbindung zwischen dem Diagnose-Multiplexer und dem Diagnosegerat ist unterbrochen.

Die Spannungsversorgung an der Diagnosedose (Klemme 30 und (oder)Klemme 31) ist fehlerhaft.

Hinweis:

Bei Verwendung des SDconnect den Verbindungsstatus uber das Toolkit prufen".

(Initialization of the diagnostic multiplexer is failed.

Possible causes:

The connection between the diagnostic multiplexer and the diagnostic socket is interrupted.

The connection between the diagnostic multiplexer and the diagnostic device is interrupted.

The power supply at the diagnostic socket(terminal 30 and (or) terminal 31) is faulty.

Notice:

The connection status when using the SDconnect check via the toolkit.)

"Due to network problems, no connection to the SDconnect can be established(749)".

"No VCI found. (701)

No SDconnect is selected or the desired SDconnect cannot be selected".

Solution

MB Star Diagnostic Tool needs to revise IP when connecting via the network. Please follow the steps below to fix the problem.

Selected "Use the following IP address(S)"

IP Address(I): 172.29.127.113

Subnet mask(U): 255.255.255.0

Technical Support

www.obd2shop.co.uk