How to Configure eCOM DoIP Mercedes ACTIA eCOM to Xentry 07.2018？

This is for those who need help to configure eCOM to work with 12.2018 Xentry enabling DOIP.
Ecom works on xentry, dts, and vediamo. Tested: Ecom works on 2019.03 xentry, xentry 2016.01, 2018.03 and 2018.12
eCOM ACTIA Interface as new device to support Mercedes Star Diagnostic & programming tool, eCOM ACTIA with latest Xentry/DAS 2018.12 software support DoIP.
Code:
C:\Program Files (x86)\Mercedes-Benz\Xentry\bin\PDU\SDConnect\PDUAPI_I+ME_ACTIA_XS.ini
then Go to section [eCOM PFW]
Edit value of key “Firmware” to “eCOM_SDconnect_24_Fw.zip”:
Firmware=eCOM_SDconnect_24_Fw.zip
Here is configuration Protocol:
Control Panel Network and Internet
Network Connections
Local Area Connection
Properties
Internet Protocol Version 4 (TCP / IPv4)
Properties
Use the following IP address (check)
Ip For eCom
IP address 169.254.255.42
Subnet mask 255.255.0.0
Use the address of the next DNS server (check)
Preferred DNS server blank
Alternate DNS server blank
Advanced setting Add
Ip For SDconnect to make Toolkit alive with eCOM
172.29.127.100
result
169.254.255.42 255.255.0.0
172.29.127.100 255.255.0.0
OK, OK, Close
With this, “eCom & SDconnect”, this config working 100% works within Xentry.

Source of eCOM DoIP with 2019.03 xentry:
http://www.obd2shop.co.uk/wholesale/for-benz-ecom-diagnose-programming.html